High-Density Polyethylene Injection Molding
High-density polyethylene is suitable for a range of processing methods, including extrusion, injection molding, powder coating, film extrusion and rotational molding.
Features
High-density polyethylene can be processed by extrusion, injection molding, powder coating, film extrusion and rotational molding. Injection-molding grades of HDPE are particularly suitable for components requiring high mechanical strength. Their resistance to environmental influences supports long-term durability in outdoor conditions.
Detailed Information
Technical Specifications & Options
HD-6070UA High Density polyethylene / HD-6040UA High Density polyethylene
| PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
|---|---|---|---|
| Physical Properties | |||
| MFI (190°C / 2.16 kg) | ASTM D 1238 | gr/10min | 7.2 |
| MFI (190°C / 5.0 kg) | gr/10min | 21.5 | |
| Density | ASTM D 1505 | gr/cm³ | 0.960 |
| Formulation | |||
| Antioxidant | √ | ||
| UV Stabilizer | √ | ||
| Mechanical Properties* | |||
| Flexural Modulus | ASTM D 790 | MPa | 1250 |
| Tensile Strength at Yield | ASTM D 638 | MPa | 31 |
| Elongation at Break | ASTM D 638 | % | 1000 |
| Charpy Impact Strength | ASTM D 256 | Kj/m² | 11 |
| Shore D Hardness | ASTM D 2240 | - | 68 |
| Environmental Stress-Cracking Resistance (ESCR) | ASTM D1894 | hr | 12 |
| Thermal Properties | |||
| Vicat Softening Temperature | ASTM D 1525 | °C | 125 |
| Melting Point | ASTM D2117 | °C | 132 |
The above data are typical laboratory average.
They are intended to serve as guide only.
Phone
+90 212 465 60 11Monday - Friday, 08:00 - 18:00
Email Address
info@phoenixpolimer.comWe will get back to you as soon as possible.
Address
Kayabaşı Mah. Kayaşehir Blv. Nidakule No:45 Kat:12 D:74-75 Başakşehir / İstanbulOur Head Office
Müşteri Hizmetleri
+90 212 465 60 11Get information about our products.